en English
en Englishhi Hindi

Angular Contact Ball Bearings

Single Row Angular Contact Ball Bearings  are designed to accommodate axial loads in one direction only. A single row angular Contact ball bearing is adjusted against a second bearing following different arrangements . i.e back to back, Face to Face or Tendem.

The bearing rings  have one high and one low shoulder through  which contact angle is maintained.

The contact angle in between rings  is  40 degrees. The axial Load carrying capacity of angular contact ball bearing  increases with increasing contact angle.


Contact Angle : 40*
Range : 7201 – 7215, 7301 – 7312
Min ID :- 10 mm
Max ID :- 75 mm
Min OD :- 32 mm
Max OD :- 130 mm
Cage Variants :-
1. Polyamide Cage
2. Machined Brass Cage


  1.  Pump
  2.  Machine Tools
  3.  Textile
  4. Gear Box

Leave a Reply